In this article
- How long does a payment take, and what do the Vantaca steps mean?
- How do I find a payment and read its status?
- What do the notes on the XN mean?
- Why was my vendor paid by check or card instead of ACH?
- How do I prove a vendor was paid?
- What is printed on a Vantaca Vendor check, and how do I add a signature?
How long does a payment take, and what do the Vantaca steps mean?
Short answer: Standard ACH takes 4–5 business days, ACH+ arrives within one business day, checks take the same processing time plus mailing, and virtual cards are usually ready within hours for vendors who have set up an account.
Timing by method
| Method | Timing from when you pay the invoice in Vantaca |
|---|---|
| Standard ACH | 4–5 business days |
| ACH+ | Within one business day |
| Check | Processing time, then mailing: 7–10 business days in total |
| Virtual card | Usually within hours if the vendor has set up an account; otherwise a few business days |
An invoice paid late in the day is picked up the next business day. Weekends and bank holidays don't count.
What happens after you pay an invoice
- Vantaca hands the payment to Vantaca Vendor.
- Funds are withdrawn from the association's bank account.
- The payment is sent to the vendor by the vendor's payment method.
- Notes are posted on the XN at each step.
If a payment shouldn't go out, stop it right away. See How do I stop a payment? (in the article Stopping a Payment: Cancel Payment and Stop & Reissue)
What the Vantaca steps mean
| Step | Meaning |
|---|---|
| Send Payment | Waiting to be picked up. Normally brief. |
| Paid Invoice (API) | The withdrawal from the association has started. The vendor is not paid yet. Read the XN notes for progress. |
| Approved to send payment | The item was stepped by hand and never reached Vantaca Vendor. Nothing will happen until it is run through Pay Invoices. |
Paid Invoice (API) does not change back if a payment is later stopped, fails or is returned. The XN notes show where the payment really is.
A payment is stuck in Send Payment
- Step the action item back to Ready for Payment.
- Process it again through Accounting > Pay Invoices. Stepping it to Send Payment by hand does nothing.
- If it is still stuck, contact support with the XN.
How do I find a payment and read its status?
Short answer: Open Transaction Monitor in the MC Dashboard, search by XN, vendor or association, and click the payment to open its Transaction Details.
Steps
- In the MC Dashboard, open Transaction Monitor.
- Search by XN, the vendor's invoice number, vendor name or association. You can also filter by payment method, status, date and amount.
- Click the payment. Transaction Details shows the status, payment method and a timeline with the date of each step.
If your dashboard shows a Review page, it lists returned and failed payments that need your attention.
What each status means
| Status | Meaning |
|---|---|
| Initiated | Received from Vantaca. The withdrawal from the association hasn't started. |
| In Process | Money is moving. A check stays In Process from printing until the vendor deposits it. |
| Completed | The ACH or virtual card payment has reached the vendor. Checks never show Completed. |
| Deposited | The vendor deposited the check. |
| Returned | The funds went back to the association after an ACH return, a stopped check or a cancellation. |
| Failed | The payment couldn't be completed. Often this is the withdrawal from the association, not the vendor's bank. |
| Cancellation In Process | Canceled. The refund to the association is on its way. |
| Cancelled | Canceled. Any refund is complete. |
For checks, Delivered on the timeline is a postal scan. Deposited confirms the vendor has the money.
Answering "where's my payment?"
- Find the payment and read its status.
- Compare with the timing for the payment method, counted from the Received date. See How long does a payment take, and what do the Vantaca steps mean?
- Completed ACH the vendor can't find: see How do I prove a vendor was paid?
- Check not received: see A check hasn't arrived or hasn't been cashed (in the article Payment Problems: Missing Checks, Returned Payments and Virtual Cards).
See what the vendor sees
Go to Vendors, open the vendor and click View as Vendor. You see the vendor's own dashboard, read-only, limited to your company's invoices.
What do the notes on the XN mean?
Short answer: Vantaca Vendor posts a note on the action item (XN) in Vantaca at each step of a payment. The notes tell you the real payment method and where the payment is.
ACH and ACH+
| Note | Meaning |
|---|---|
| "Debit transfer submitted: Pulling funds from HOA account…" | Funds are being withdrawn from the association. The vendor is not paid yet. |
| "Credit transfer submitted: Funds on the way to vendor. ACH Trace Number…" | The payment has been sent to the vendor's bank. It can no longer be stopped. |
| "The payment has settled with the vendor's bank. Sending an email to…" | The money is in the vendor's account. |
| "ACH debit from association bank failed due to ACH return code…" | The association's bank refused the withdrawal. The vendor was not paid. |
| "ACH credit to vendor failed due to ACH return code…" | The vendor's bank returned the payment. |
| "Returning funds to the association bank" | A refund to the association is on its way. |
Checks
| Note | Meaning |
|---|---|
| "Check sent to printer as Vendor Pay check #N" | The check is queued for printing. |
| "Check #N mailed to … (Tracking: …)" | The check is in the mail. The note shows the address used. |
| "Update from USPS: Check #N is out for delivery" | Delivery is expected that day. |
| "Check #N deposited by vendor" | The vendor has deposited the check. Images are attached. |
| "Check #N was stopped. The check could not be delivered…" | The post office couldn't deliver it, so it was stopped automatically. |
| "Check #N was returned…" | The post office returned the check to sender. |
| "Check #N was stopped and the payment is being reissued by the management company." | Your company used Stop & Reissue. A new payment is being sent under the same XN. |
| "Check #N was stopped by admin and queued for resend" | Support stopped the check and a replacement is being sent under the same XN. |
Virtual cards
| Note | Meaning |
|---|---|
| "Virtual card ready notification emailed to vendor." | The card was issued and emailed to the vendor. |
| "Vendor Pay has paid this invoice online with a virtual card." | Vantaca Vendor paid the vendor's online invoice link by card. The vendor has been paid. |
Good to know
- Two check numbers on one XN means the first check was stopped and replaced. It is one payment, and only the newest check is valid.
- What to do next: for a failed or returned payment, see A payment failed or was returned. For a stopped or undelivered check, see A check hasn't arrived or hasn't been cashed.
Why was my vendor paid by check or card instead of ACH?
Short answer: First confirm it really was a check. Vantaca's CMP screen shows "Check" for every Vantaca Vendor payment, including ACH and virtual card. The real method is in the Transaction Monitor and the XN notes.
Step 1: Find the real method
- Transaction Monitor: the Payment Method column shows it.
- XN notes: the wording of the notes names the method. See What do the notes on the XN mean?
- If CMP says "Check" but there is no check number, it was not a check.
Step 2: If it really was a check
The method is set when Vantaca Vendor picks up the payment, from what is on file at that moment.
| Situation | Why a check was sent |
|---|---|
| Vendor has not set up an account | Your Vantaca vendor record had no usable bank details. |
| Vendor has set up an account | The vendor had no approved bank account yet. They skipped the banking step, or a change was still being reviewed. |
| Details were added after pickup | A change applies only to payments not yet sent. |
| The vendor exists twice in Vantaca | The invoice was coded to the record without banking. Contact support to merge duplicates. |
Why a virtual card?
- The vendor chose Virtual Card in their profile, or
- Vantaca Vendor paid the vendor's online invoice link by card, or
- your company asked for a payment to be reissued as a card.
Can it be re-sent by ACH?
If the check has not been deposited, yes. Use Stop & Reissue in the Transaction Monitor. See How do I stop a payment and send it again (Stop & Reissue)? If the check has been deposited, the vendor has been paid.
How do I prove a vendor was paid?
Short answer: Use the ACH trace number or check images posted on the XN in Vantaca. For a completed ACH the vendor says they don't have, ask them to look for a deposit from the association's name, described as "Vantaca Vendor Pay."
Where the proof is
| Method | Proof |
|---|---|
| ACH / ACH+ | The trace number in the XN note "Credit transfer submitted…", and the vendor's "Payment Deposited" email |
| Check | The check image posted on the XN when it is mailed, and front and back images when it is deposited |
| Virtual card | The XN note "Virtual card ready notification emailed to vendor" |
The ACH shows Completed, but the vendor says they weren't paid
A completed ACH has settled in the account on file. Ask the vendor to:
- Look for a deposit from the association's name (shortened to 16 characters), described as "Vantaca Vendor Pay." It won't show your company's name or "Vantaca."
- Check the account ending in the last four digits shown in their "Payment Deposited" email.
- Remember the amount is net of any fee shown in that email.
If the last four digits don't match any account the vendor holds, contact support with the XN right away.
The check shows deposited, but the vendor says they didn't deposit it
Contact support with the XN right away.
What is printed on a Vantaca Vendor check, and how do I add a signature?
Short answer: Checks show the association as payer and the vendor as payee, with the account, invoice number and XN in the memo. If the Check Signatures page is enabled for your company, you can add a signature there.
What's on the check
| Item | What is printed |
|---|---|
| Payer | The association's name. Long names may be abbreviated. |
| Payee | The vendor's name, up to 35 characters |
| Memo | Acct#[account]; Invoice#[invoice]; XN#[XN] |
| Check number | The bank's check number. It won't match your Vantaca check register. |
| QR code | For vendors who haven't set up an account: scanning it emails them an invitation. |
Checks are valid for 180 days from the issue date.
Vendors sometimes look for a check from "Vantaca" or from your company. Tell them to look for the association's name.
Add a signature
- In the MC Dashboard, open Check Signatures. If you don't see it, contact support to have it enabled.
- Upload a signature image and set it as your company default.
- For each association, choose Use management company setting, upload a signature specific to that association, or leave No signature (the default).
The configured associations list shows which associations print a signature and which one.
Related articles
- Vantaca Vendor MC Dashboard and Managing Vendors
- Stopping a Payment: Cancel Payment and Stop & Reissue
- Payment Problems: Missing Checks, Returned Payments and Virtual Cards
Need more help?
Contact Vantaca Vendor support at support.vendor@vantaca.com.
Comments